Push ce_value bug 320-8

Found a bug in R'n'D? Report it here!

Moderators: Flumminator, Zomis

Post Reply
User avatar
Alan
Posts: 661
Joined: Fri Jun 18, 2004 7:48 pm

Push ce_value bug 320-8

Post by Alan »

Push ce_value bug

This CE is simply a push block that uses the gfx command CE_value.
It has no change pages but it uses the 2727.pcx so you can see what's
going on.

When you push it its value changes to some number (too fast to see but
its lower than 10) then changes back to its proper value. I'm not sure
if its the actual value that's changing or just the graphic, either way
I take it this isn't intended.

What I wanted to do is set its value to 10 when the player pushes it,
but this weird bug is reseting it randomly.

This worked in 3.2.0-7 btw
User avatar
Holger
Site Admin
Posts: 4073
Joined: Fri Jun 18, 2004 4:13 pm
Location: Germany
Contact:

Post by Holger »

Haven't checked this yet, but I'll do...
User avatar
Holger
Site Admin
Posts: 4073
Joined: Fri Jun 18, 2004 4:13 pm
Location: Germany
Contact:

Post by Holger »

OK, I finally found and fixed this bug!

(BTW: The CE value was not affected, it was "only" a graphical bug.)
Post Reply